Our Performers
BFW RHINO 255O
- Swing over bed type : 550mm
- Swing over carriage : 330mm
- Admit between centre distance : 625mm
- Standard turning diameter : 320mm
- Max turning diameter : 340mm
- Interference free turning diameter : 260mm
- Max turning length between centre : 610mm
- Max turning length with std chuck : 505mm
- Standard chuck size : 305mm
- Bar capacity : 82mm
- Turret indexing mechanism type : Hydraulic
- Turning tool shank size ( B x W) : 25x25mm
- Number of tools No’s : 12
- Boring tool holder size (dia) : 40mm
- Spindle nose type : A2 8
HONING MACHINE 1.5 MT
- Max Stroke length : 1700mm
- Min and Max Honing Ø : Ø35mm – Ø350mm (Manual) Ø35mm – Ø250mm (Hydraulic)
- Head Drive : 7.5HP Hydromotor with gearbox
- Spindle RPM : 80 – 120 RPM
- Spindle Reciprocating Speed : Max 8 Meters infinity variable
- FW & BW Movement : Hydraulic cylinder 7.5HP (Reciprocation)
- Coolant Motor : 0.5HP
- Coolant Tank : 150 Liters
- Honing Head Expansion : Manual/Hydraulic Expansion Type
- Tool Expansion system : 2 HP
- Drive Shaft : 1 Manual & 1 Hydraulic
- Job Clamping : Manual
- Total Connected HP : 16.5HP
VERTICAL TURRET MILLING
- Make : Lagun (Spain)
- Model : FTV-4
- Table Size : 280mm x 1370mm
- XYZ Travel : 800mm x 350mm x 400mm
- Spindle Speeds : 48 rpm - 3750 rpm
- Spindle Taper : ISO 40
- Spindle Travel : 127mm
- Table Feed Rate - 12 mm/min - 576 mm/min
- Motorized Feed & Rapid Travel in all 3 : Axis of Table Movement
- Equipped with 2 : Axis DRO
BALAJI MANUAL 2.5 MT LATHE
- Bed : Flame hardened bed ways
- Centre Height : 355 mm (14")
- Width of bed : 375 mm (15")
- Main Spindle hollow : 104 mm (4")
- Main Spindle nose : A2-8 Type
- Main Spindle Speeds Nos / RPM Range : 12 / 30-1060 RPM
- Main Spindle mounting : Taper Roller Bearings
- Head Stock Gears : Hardened with Nitriding Process
- Norton Gear Box with double shaft : All Gears are hardened with Nitriding Process
- Between centres : 2500 mm
ESAB Buddy™ MIG 500i
- Mains supply, V/Ph, Hz : 400 ±15% / 3, 50
- Effective Input Current, A : 29
- Permitted load at 60% duty cycle, A : 500
- Permitted load at 100% duty cycle, A : 387
- Power factorat maximum current : 0.93
- Efficiency at maximum current,% : 85
- Current range, A : 50 -500
- Voltage range, V : 16.5 –39
- Opencircuit voltage(OCV), V : 70
- Dimensions l x w xh, mm : 610 x 335 x 640
- Weight, kg : 56
- Operating temperature, degreeC : -10 to 40
- Enclosure class : IP 21
- Application class : S
- Standards : IEC 60974 -1 / IEC 60974 -10
Buddy™Feed 402
- Wire feed Speed,m/min : 1.5 -20
- Wire diameter,MS/SS/ (FC/AL), mm : 0.8 –1.6 (1.2 –1.6)
- Dimensions l x w xh, mm : 460 x 200 x 280
- Weight, Kg : 9
Add a footnote if this applies to your business